Decibels

The sound intensity I may be expressed in decibels above the standard threshold of hearing I0 . The expression is

The logarithm involved is just the power of ten of the sound intensity expressed as a multiple of the threshold of hearing intensity. Example: If I= 10,000 times the threshold, then the ratio of the intensity to the threshold intensity is 104, the power of ten is 4, and the intensity is 40 dB:

The factor of 10 multiplying the logarithm makes it decibels instead of Bels, and is included because about 1 decibel is the just noticeable difference (JND) in sound intensity for the normal human ear.

Decibels provide a relative measure of sound intensity. The unit is based on powers of 10 to give a manageable range of numbers to encompass the wide range of the human hearing response, from the standard threshold of hearing at 1000 Hz to the threshold of pain at some ten trillion times that intensity.

Another consideration which prompts the use of powers of 10 for sound measurement is the rule of thumb for loudness: it takes about 10 times the intensity to sound twice as loud.

Decibel calculationDynamic levels of music in dB
Index

Sound level measurement
 
HyperPhysics***** Sound R Nave
Go Back








Decibels and Logarithms

The decibel scale is a reflection of the logarithmic response of the human ear to changes in sound intensity:

The logarithm to the base 10 used in this expression is just the power of 10 of the quantity in brackets according to the basic definition of the logarithm:

Examples:

Decibel calculation
Index

Sound level measurement
 
HyperPhysics***** Sound R Nave
Go Back








Decibel Calculation

The sound intensity in decibels above the standard threshold of hearing is calculated as a logarithm. If the intensity as a multiple of threshold is

= x 10^

then the intensity in decibels is given by

Decibels can also be used to express the relative intensity of two sounds. If one is expressed as a multiple of the other:

IA = xIB = x 10^xIB

then the difference in decibels is given by

IA = dB above IB
Index

Sound level measurement
 
HyperPhysics***** Sound R Nave
Go Back








JND in Sound Intensity

A useful general reference is that the just noticeable difference in sound intensity for the human ear is about 1 decibel.

JND = 1 decibel

In fact, the use of the factor of 10 in the definition of the decibel is to create a unit which is about the least detectable change in sound intensity.

That having been established, it can be noted that there are some variations. The jnd is about 1 dB for soft sounds around 30-40 dB at low and midrange freqencies. It may drop to 1/3 to 1/2 a decibel for loud sounds.

Caution must be used in applying the "one decibel" criterion. It presumes that you are increasing the same sound by one decibel. If you were adding a sound outside the critical band of frequency from this sound, you would be exciting fresh nerve endings, and the one decibel rule can't be presumed to apply. This causes some concern about the perceptual encoding schemes used with modern digital recording which might eliminate some significant audible content by the use of a "one decibel" criterion for dropping content.

Illustration of variations
Index

Sound level measurement
 
HyperPhysics***** Sound R Nave
Go Back






Variations in Difference Threshold

Just noticeable differenceDecibels
Index

Sound level measurement

Reference
Backus
 
HyperPhysics***** Sound R Nave
Go Back